Address
1903 US 49 Florence, MS 39073
Business Hours
Mon - Thu
9 a.m. - 4 p.m.
Friday
9 a.m. - 11 a.m. & 12:30 p.m. - 4 p.m.
Saturday-Sunday
closed
3D Cycle Parts started with a mission to make products that fix common problems on the KLR650. Our solutions have brought new life to many broken parts, made repairs more affordable, and improved durability in the process. Over the last few years we have added over 75 brands to our shop and we are in the process of expanding our selection to include riding gear, tires, and parts for other Adventure bikes! We are located in Jackson, Mississippi, USA and we ship anywhere within the USA. All products are in stock and ship daily unless the product page states otherwise. Thanks for visiting!
These bolt on risers change the angle and height of the factory 2022+ KLR650 windshield to provide better wind protection to the rider and decrease buffeting on the helmet. The angle has been increased by over 25 degrees which raises the height by 3.25". These risers are designed and manufactured in house by 3D Cycle Parts. They are CNC machined from 1/2" HDPE and have threaded brass inserts for the 5mm threads. They are very strong and have been thoroughly tested and are covered by a no hassle warranty. Can be used in the low and high position and can be adjusted just by removing the bottom screws, unlike the stock configuration in which the windscreen blocks the screws. Includes stainless steel hardware. Installs easily using supplied hardware.
NOTE: Includes low strength thread locker which is required to make sure fasteners do not seize in the inserts. If this supplied thread locker and hardware is not used the warranty will be voided. These risers are not approved for use with windscreens other than stock. Doing so will void warranty on risers and windscreen.
I was extremely satisfied with the high quality products and services you provided. Each item was precisely what I expected. When I had questions, they were answered quickly and thoroughly. 3D Cycle parts is the kind of company that reminds me of a time when the customer mattered and the company went out of their way to earn their business. I have and will continue to recommend 3D Cycle Parts to others in the ADV and motorcycle community based on this experience.
Tu Combs
Owner
3D Cycle Parts started with a mission to make products that fix common problems on the KLR650. Our solutions have brought new life to many broken parts, made repairs more affordable, and improved durability in the process. Over the last few years we have added over 75 brands to our shop and we are in the process of expanding our selection to include riding gear, tires, and parts for other Adventure bikes! We are located in Jackson, Mississippi, USA and we ship anywhere within the USA. All products are in stock and ship daily unless the product page states otherwise. Thanks for visiting!
Business Hours
Mon - Thu
9 a.m. - 4 p.m.
Friday
9 a.m. - 11 a.m. & 12:30 p.m. - 4 p.m.
Saturday-Sunday
closed