Address
1903 US 49 Florence, MS 39073
Business Hours
Mon - Thu
9 a.m. - 4 p.m.
Friday
9 a.m. - 11 a.m. & 12:30 p.m. - 4 p.m.
Saturday-Sunday
closed
3D Cycle Parts started with a mission to make products that fix common problems on the KLR650. Our solutions have brought new life to many broken parts, made repairs more affordable, and improved durability in the process. Over the last few years we have added over 75 brands to our shop and we are in the process of expanding our selection to include riding gear, tires, and parts for other Adventure bikes! We are located in Jackson, Mississippi, USA and we ship anywhere within the USA. All products are in stock and ship daily unless the product page states otherwise. Thanks for visiting!
Is the vacuum operated portion of your stock petcock giving you trouble? Are you wanting the simplicity of a manual petcock? This is the kit for you! The Yamaha petcock that is a common replacement for the OEM KLR petcock has a couple of downsides. 1. The primary fuel tube that ensures you have reserve fuel left is about half the height of the oem, leaving you with only about 20 miles of reserve range. 2. The fuel outlet points straight back instead of down, requiring you to change the fuel line plumbing to compensate for it. This blockoff kit does away with the vacuum portion of the oem petcock while avoiding the downsides mentioned above. It turns your vacuum petcock into a manual one. Installation is as simple as removing the four screws from the back of the petcock, removing the factory rear plate and diaphragm, then installing the new gasket and blockoff plate with the supplied hardware. We even include a rubber cap for the vacuum port on the carburetor. The blockoff plate is machined in house from aluminum.
This kit is Made in the USA and is a 3D Cycle Parts product.
The installed photo shows the old style plate, installation of the new style plate is the same.
I was extremely satisfied with the high quality products and services you provided. Each item was precisely what I expected. When I had questions, they were answered quickly and thoroughly. 3D Cycle parts is the kind of company that reminds me of a time when the customer mattered and the company went out of their way to earn their business. I have and will continue to recommend 3D Cycle Parts to others in the ADV and motorcycle community based on this experience.
Tu Combs
Owner
3D Cycle Parts started with a mission to make products that fix common problems on the KLR650. Our solutions have brought new life to many broken parts, made repairs more affordable, and improved durability in the process. Over the last few years we have added over 75 brands to our shop and we are in the process of expanding our selection to include riding gear, tires, and parts for other Adventure bikes! We are located in Jackson, Mississippi, USA and we ship anywhere within the USA. All products are in stock and ship daily unless the product page states otherwise. Thanks for visiting!
Business Hours
Mon - Thu
9 a.m. - 4 p.m.
Friday
9 a.m. - 11 a.m. & 12:30 p.m. - 4 p.m.
Saturday-Sunday
closed