Refer to the Installation Instructions & Dosage Chart for more info and to determine how much to order for your application.

Discover the advantages of a product that will turn any tire into a self-sealing and self-balancing tire for life!

Ride-On Tire Protection is a line of gel-like tire sealants and tire balancers containing fibers six times stronger than steel that coat the inner liners of tires. This protective tire sealant coating is formulated to prevent flats caused by punctures, hydrodynamically balance tire/wheel assemblies (with or without wheel weights) for the life of a tire, extend tire life by lowering tire operating temperatures and helping tires maintain their set-point pressures by eliminating porosity air loss. Ride-On comes in different tire sealant formulations for use in high-speed, on-road as well as slow-moving, off-road applications. Whether in your motorcycle, car or SUV, over-the-road or off-road use, in brand-new tires or retreads, tires that are on vehicles or in your ready rack, we have a solution that will work for you or your fleet.

By helping balance tires for their legal life and helping tires maintain their set point pressures, Ride-On will not only help tires run cooler and extend tire life, but it will act as your guardian to eliminate flat tires and keep you from getting stranded on the side of the road. Ride-On Tire Protection is truly a unique tire sealant and balancing gel in one that offers these and more benefits.

• Ride-On TPS (Tire Protection System) is a tire balancer and sealant compound for tube or tubeless tires that evenly coats the inner surface of your tires
• Eliminates the need for wheel weights, specially formulated to hydro-dynamically balance high speed tires, dampen road noise and vibrations that cause a rough ride
• If the tire is punctured in the contact patch, the centrifugal force of the rotating tire and the internal air pressure force Ride-On into the hole, sealing it instantly
• Ride-On is a Green biodegradable product that is designed to be non-hazardous and non-flammable, and contains corrosion inhibitors that protect all alloys of steel, aluminum, magnesium and yellow metals against oxidation
• Ride-On TPS will act as a balancer and will result in erroneous readings from a dynamic spin balancer
• IMPORTANT NOTE: After installing Ride-On TPS Motorcycle Formula sealant into the tires, a slight vibration may be noticed until the sealant has warmed up and distributed evenly in the tires. This process usually takes 2 to 5 miles.
• 8 fluid ounces.

Refer to the Installation Instructions & Dosage Chart for more info and to determine how much to order for your application.